TOP CATEGORIES
SALE PRODUCTS
SPECIAL OFFER
Schneider EOCR-SS Electronic Over Load Relay 0.5-6.5A
Product : Schneider EOCR-SS Electronic Over Load Relay 0.5-6.5A
Adjustable current range : 0.5-6.5 (built‑in CT)
Protects against overload, phase loss, unbalance
Adjustable trip time & start delay; auto/manual reset
Relay C/O output to trip contactor; status LEDs
DIN‑rail/panel mount; quick pass‑through wiring
Measurement : 3‑phase pass‑through up to 6.5A
Supply : 110/220 VAC, 50/60 Hz
Output Contact : 1 C/O, up to 5A @ 250 VAC
Settings : current 0.5-6.5A
trip delay ~0.5–30 s; start delay adjustable
Indication/Reset: RUN/TRIP LEDs; manual/auto reset selectable
Schneider EOCR-SS Electronic Over Load Relay 5-70A
Product : Schneider EOCR-SS Electronic Over Load Relay 5-70A
Adjustable current range : 5-70A (built‑in CT)
Protects against overload, phase loss, unbalance
Adjustable trip time & start delay; auto/manual reset
Relay C/O output to trip contactor; status LEDs
DIN‑rail/panel mount; quick pass‑through wiring
Measurement : 3‑phase pass‑through up to 70A
Supply : 110/220 VAC, 50/60 Hz
Output Contact : 1 C/O, up to 5A @ 250 VAC
Settings : current 5-70A
trip delay ~0.5–30 s; start delay adjustable
Indication/Reset: RUN/TRIP LEDs; manual/auto reset selectable
COB-61 Push Button Switch Rain Proof
Product : COB-61 Push Button Switch Rain Proof
Model: COB-61
Material: plastic
Water proof: yes
Color: Orange.
Ambient operating temperature: -20 ~ + 131 F.
Contact structure: composite button.
Contact resistance: 50 (Ω)
Insulation resistance: 50 (MΩ).
Push buttons: 2 ways, up and down.
Type of contact: momentary.
Easy to use and easy to install.
Small size and easy to carry.
UNI-T UT-204+ Digital Clamp Meter
Product : UNI-T UT-204+ Digital Clamp Meter
| AC current (A) | 600A | ±(2.5%+5) |
| DC current (A) | 600A | ±(2.5%+5) |
| AC voltage (V) | 600V | ±(0.8%+5) |
| AC voltage frequency(Hz) | 10Hz~60kHz | ±(0.5%+2) |
| DC voltage (A) | 600V | ±(0.5%+2) |
| Resistance (Ω) | 60MΩ | ±(0.8%+2) |
| Capacitance (F) | 60mF | ±(4%+5) |
| Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
| Display count | 6000 | |
| Auto range | √ | |
| Jaw opening | 28mm | |
| True RMS | √ | |
| NCV | √ | |
| Live wire test | √ | |
| Continuity test | √ | |
| Diode | √ | |
| MAX/MIN | √ | |
| Relative mode | √ | |
| Zero mode | √ | |
| Data hold | √ | |
| Low battery indication | √ | |
| Auto power off | √ | |
| Power | 1.5V battery (R03) x 2 | |
| Display | 37mm x 25mm | |
| Product color | Red and grey | |
| Product net weight | 235g | |
| Product size | 215mm x 63mm x 36mm | |
| Standard accessories | Batteries, test leads, Themocouple | |
| Standard individual packing | Gift box, Carring bag, English manual | |
UNI-T UT-201+ Digital Clamp Meter
Product : UNI-T UT-201+ Digital Clamp Meter
| AC current (A) | 400A | ±(2%+10) | ||||
| AC current frequency (Hz) | 50Hz~100Hz | ±(1%+5) | ||||
| AC voltage (V) | 600V | ±(0.8%+5) | ||||
| AC voltage frequency(Hz) | 10Hz~10kHz | ±(1%+5) | ||||
| DC voltage (A) | 600V | ±(0.5%+2) | ||||
| Resistance (Ω) | 40MΩ | ±(0.8%+2) | ||||
| Display count | 4000 | |||||
| Auto range | √ | |||||
| Jaw opening | 28mm | |||||
| True RMS | √ | |||||
| NCV | √ | |||||
| Continuity test | √ | |||||
| Diode | √ | |||||
| MAX/MIN | √ | |||||
| Data hold | √ | |||||
| Low battery indication | √ | |||||
| Auto power off | √ | |||||
| General Characteristics | ||||||
| Power | 1.5V battery (R03) x 2 | |||||
| Display | 37mm x 25mm | |||||
| Product color | Red and grey | |||||
| Product net weight | UT201+ ：248g; | |||||
| Product size | 215mm x 63mm x 36mm | |||||
| Standard accessories | Batteries, test leads | |||||
| Standard individual packing | Gift box, Carring bag, English manual | |||||
UNI-T UT-207a Digital Clamp Meter
Product : UNI-T UT-207a Digital Clamp Meter
| Function | Range(s) | Basic Accuracy |
|---|---|---|
| AC Current (A) | 40A / 400A / 1000A | ±(2.5% + 8) to ±(2.0% + 2) |
| DC Current (A) | 40A / 400A / 1000A | ±(2.0% + 5) to ±(1.5% + 5) |
| DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.8% + 1) to ±(1.0% + 3) |
| AC Voltage (V) | 400mV/4V/40V/400V/750V | ±(1.2% + 3) to ±(1.2% + 20) |
| Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1.0% + 2) to ±(1.5% + 2) |
| Frequency (Hz) | 10Hz/100Hz/1kHz/10kHz/1MHz/10MHz | ±(0.1% + 3) |
| Duty Cycle | 0.1% ~ 99.9% | For reference only |
| Display Type | Backlit LCD, 47mm × 30mm |
| Display Count | 3999 (3¾ digits) |
| Jaw Opening | 55mm (maximum conductor size: 45mm diameter) |
| Sampling Rate | 3 times/second |
| Auto Ranging | Yes |
| Continuity Threshold | Buzzer beeps at <10Ω |
| Diode Test | Yes (open circuit voltage ~1.5V) |
| ZERO Button | Yes (for offset calibration) |
| Auto Power Off | 15 minutes |
| Low Battery Indication | Yes |
| Power Supply | 9V battery (6LF22) ×1 |
| Product Dimensions | 286mm × 105mm × 45mm |
| Product Net Weight | ~533g (including battery) |
| Safety Rating | CAT II 600V / CAT III 300V, Pollution Degree 2 |
Augue adipiscing euismod
₨199.00
Scelerisque facilisi rhoncus non faucibus parturient senectus lobortis a ullamcorper vestibulum mi nibh ultricies a parturient gravida a vestibulum leo sem in. Est cum torquent mi in scelerisque leo aptent per at vitae ante eleifend mollis adipiscing.
Classic wooden chair
₨299.00
Scelerisque facilisi rhoncus non faucibus parturient senectus lobortis a ullamcorper vestibulum mi nibh ultricies a parturient gravida a vestibulum leo sem in. Est cum torquent mi in scelerisque leo aptent per at vitae ante eleifend mollis adipiscing.
MOST POPULAR
Cum cubilia ac fringilla lorem
quis himenaeos velit.
FOR SAFETY
Schneider EOCR-SS Electronic Over Load Relay 0.5-6.5A
Product : Schneider EOCR-SS Electronic Over Load Relay 0.5-6.5A
Adjustable current range : 0.5-6.5 (built‑in CT)
Protects against overload, phase loss, unbalance
Adjustable trip time & start delay; auto/manual reset
Relay C/O output to trip contactor; status LEDs
DIN‑rail/panel mount; quick pass‑through wiring
Measurement : 3‑phase pass‑through up to 6.5A
Supply : 110/220 VAC, 50/60 Hz
Output Contact : 1 C/O, up to 5A @ 250 VAC
Settings : current 0.5-6.5A
trip delay ~0.5–30 s; start delay adjustable
Indication/Reset: RUN/TRIP LEDs; manual/auto reset selectable
Schneider EOCR-SS Electronic Over Load Relay 5-70A
Product : Schneider EOCR-SS Electronic Over Load Relay 5-70A
Adjustable current range : 5-70A (built‑in CT)
Protects against overload, phase loss, unbalance
Adjustable trip time & start delay; auto/manual reset
Relay C/O output to trip contactor; status LEDs
DIN‑rail/panel mount; quick pass‑through wiring
Measurement : 3‑phase pass‑through up to 70A
Supply : 110/220 VAC, 50/60 Hz
Output Contact : 1 C/O, up to 5A @ 250 VAC
Settings : current 5-70A
trip delay ~0.5–30 s; start delay adjustable
Indication/Reset: RUN/TRIP LEDs; manual/auto reset selectable
COB-61 Push Button Switch Rain Proof
Product : COB-61 Push Button Switch Rain Proof
Model: COB-61
Material: plastic
Water proof: yes
Color: Orange.
Ambient operating temperature: -20 ~ + 131 F.
Contact structure: composite button.
Contact resistance: 50 (Ω)
Insulation resistance: 50 (MΩ).
Push buttons: 2 ways, up and down.
Type of contact: momentary.
Easy to use and easy to install.
Small size and easy to carry.
UNI-T UT-204+ Digital Clamp Meter
Product : UNI-T UT-204+ Digital Clamp Meter
| AC current (A) | 600A | ±(2.5%+5) |
| DC current (A) | 600A | ±(2.5%+5) |
| AC voltage (V) | 600V | ±(0.8%+5) |
| AC voltage frequency(Hz) | 10Hz~60kHz | ±(0.5%+2) |
| DC voltage (A) | 600V | ±(0.5%+2) |
| Resistance (Ω) | 60MΩ | ±(0.8%+2) |
| Capacitance (F) | 60mF | ±(4%+5) |
| Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
| Display count | 6000 | |
| Auto range | √ | |
| Jaw opening | 28mm | |
| True RMS | √ | |
| NCV | √ | |
| Live wire test | √ | |
| Continuity test | √ | |
| Diode | √ | |
| MAX/MIN | √ | |
| Relative mode | √ | |
| Zero mode | √ | |
| Data hold | √ | |
| Low battery indication | √ | |
| Auto power off | √ | |
| Power | 1.5V battery (R03) x 2 | |
| Display | 37mm x 25mm | |
| Product color | Red and grey | |
| Product net weight | 235g | |
| Product size | 215mm x 63mm x 36mm | |
| Standard accessories | Batteries, test leads, Themocouple | |
| Standard individual packing | Gift box, Carring bag, English manual | |
UNI-T UT-201+ Digital Clamp Meter
Product : UNI-T UT-201+ Digital Clamp Meter
| AC current (A) | 400A | ±(2%+10) | ||||
| AC current frequency (Hz) | 50Hz~100Hz | ±(1%+5) | ||||
| AC voltage (V) | 600V | ±(0.8%+5) | ||||
| AC voltage frequency(Hz) | 10Hz~10kHz | ±(1%+5) | ||||
| DC voltage (A) | 600V | ±(0.5%+2) | ||||
| Resistance (Ω) | 40MΩ | ±(0.8%+2) | ||||
| Display count | 4000 | |||||
| Auto range | √ | |||||
| Jaw opening | 28mm | |||||
| True RMS | √ | |||||
| NCV | √ | |||||
| Continuity test | √ | |||||
| Diode | √ | |||||
| MAX/MIN | √ | |||||
| Data hold | √ | |||||
| Low battery indication | √ | |||||
| Auto power off | √ | |||||
| General Characteristics | ||||||
| Power | 1.5V battery (R03) x 2 | |||||
| Display | 37mm x 25mm | |||||
| Product color | Red and grey | |||||
| Product net weight | UT201+ ：248g; | |||||
| Product size | 215mm x 63mm x 36mm | |||||
| Standard accessories | Batteries, test leads | |||||
| Standard individual packing | Gift box, Carring bag, English manual | |||||
UNI-T UT-207a Digital Clamp Meter
Product : UNI-T UT-207a Digital Clamp Meter
| Function | Range(s) | Basic Accuracy |
|---|---|---|
| AC Current (A) | 40A / 400A / 1000A | ±(2.5% + 8) to ±(2.0% + 2) |
| DC Current (A) | 40A / 400A / 1000A | ±(2.0% + 5) to ±(1.5% + 5) |
| DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.8% + 1) to ±(1.0% + 3) |
| AC Voltage (V) | 400mV/4V/40V/400V/750V | ±(1.2% + 3) to ±(1.2% + 20) |
| Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1.0% + 2) to ±(1.5% + 2) |
| Frequency (Hz) | 10Hz/100Hz/1kHz/10kHz/1MHz/10MHz | ±(0.1% + 3) |
| Duty Cycle | 0.1% ~ 99.9% | For reference only |
| Display Type | Backlit LCD, 47mm × 30mm |
| Display Count | 3999 (3¾ digits) |
| Jaw Opening | 55mm (maximum conductor size: 45mm diameter) |
| Sampling Rate | 3 times/second |
| Auto Ranging | Yes |
| Continuity Threshold | Buzzer beeps at <10Ω |
| Diode Test | Yes (open circuit voltage ~1.5V) |
| ZERO Button | Yes (for offset calibration) |
| Auto Power Off | 15 minutes |
| Low Battery Indication | Yes |
| Power Supply | 9V battery (6LF22) ×1 |
| Product Dimensions | 286mm × 105mm × 45mm |
| Product Net Weight | ~533g (including battery) |
| Safety Rating | CAT II 600V / CAT III 300V, Pollution Degree 2 |
SALE PRODUCTS
FAVORITE COLLECTION
SAFETY DEVICES minimizes the risk of workplace accidents and safeguards the well-being of every employee.
Decoration wooden present
₨89.00
Nam gravida vulputate est venenatis eu at ullamcorper consectetur parturient suspendisse a elit lobortis ut convallis vestibulum vulputate nunc praesent mattis sem faucibus risus sociosqu.Dapibus curae a ac vestibulum a magnis ullamcorper orci a iaculis adipiscing augue a massa a torquent feugiat a. Scelerisque vestibulum.
Eames plastic side chair
₨99.00
Consequat a scelerisque suspendisse vel et eget eu vitae adipiscing nibh scelerisque semper cum adipiscing facilisis adipiscing est accumsan lorem vestibulum. Aliquet mus a aptent ullam corper metus accumsan. Habitasse a purus nec ipsum a urna ac ullamcorper varius metus blandit posuere.
Panton tunior chair
₨199.00
Placerat tempor dolor eu leo ullamcorper et magnis habitant ultrices consectetur arcu nulla mattis fermentum adipiscing a et bibendum sed platea malesuada eget vestibulum.
SASETY & COMFERT
UNI-T UT-203+ Digital AC/DC Clamp Meter
| Model | Range | UT203+ |
| AC current (A) | 400A | ±(2.5%+5) |
| DC current (A) | 400A | ±(2.5%+5) |
| AC voltage (V) | 600V | ±(0.8%+5) |
| AC voltage frequency(Hz) | 10Hz~60kHz | ±(0.5%+2) |
| DC voltage (A) | 600V | ±(0.5%+2) |
| Resistance (Ω) | 40MΩ | ±(0.8%+2) |
| Capacitance (F) | 40mF | ±(4%+5) |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
| Display count | 4000 | |
| Auto range | √ | |
| Jaw opening | 28mm | |
| True RMS | √ | |
| NCV | √ | |
| Continuity test | √ | |
| Diode | √ | |
| MAX/MIN | √ | |
| Relative mode | √ | |
| Zero mode | √ | |
| Data hold | √ | |
| Low battery indication | √ | |
| Auto power off | √ | |
| Power | 1.5V battery | |
| Display | 37mm x 25mm | |
| Product color | Red and grey | |
| Product net weight | 235g | |
| Product size | 215mm x 63mm x 36mm | |
| Standard individual packing | Gift box, Carring bag, English manual | |
UNI-T UT-204+ Digital Clamp Meter
Product : UNI-T UT-204+ Digital Clamp Meter
| AC current (A) | 600A | ±(2.5%+5) |
| DC current (A) | 600A | ±(2.5%+5) |
| AC voltage (V) | 600V | ±(0.8%+5) |
| AC voltage frequency(Hz) | 10Hz~60kHz | ±(0.5%+2) |
| DC voltage (A) | 600V | ±(0.5%+2) |
| Resistance (Ω) | 60MΩ | ±(0.8%+2) |
| Capacitance (F) | 60mF | ±(4%+5) |
| Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
| Display count | 6000 | |
| Auto range | √ | |
| Jaw opening | 28mm | |
| True RMS | √ | |
| NCV | √ | |
| Live wire test | √ | |
| Continuity test | √ | |
| Diode | √ | |
| MAX/MIN | √ | |
| Relative mode | √ | |
| Zero mode | √ | |
| Data hold | √ | |
| Low battery indication | √ | |
| Auto power off | √ | |
| Power | 1.5V battery (R03) x 2 | |
| Display | 37mm x 25mm | |
| Product color | Red and grey | |
| Product net weight | 235g | |
| Product size | 215mm x 63mm x 36mm | |
| Standard accessories | Batteries, test leads, Themocouple | |
| Standard individual packing | Gift box, Carring bag, English manual | |
Schneider 1P 1000VDC 100A MCB Miniature Circuit Breaker
Description: Schneider 1P 1000VDC 100A MCB Miniature Circuit Breaker
| Product | DC+AC 1 Pole MCB 1000V |
| Model | C120H-DC |
| Number of poles | 1 Pole |
| Rated working voltage | 1000V DC |
| Rated insulation voltage | 1200V DC |
| Current rating | 100A |
| Ultimate breaking capacity | 6kA class on the local page |
| Operating breaking capacity | Ics = 100% of Icu on local page |
| Mechanical life | 20,000 operations |
| Electrical life | PV: 1500 / PVn: 300 on local page |
| Working temperature | -35°C to +70°C |
| Storage temperature | -40°C to +85°C |
| Protection degree | IP20 |
| Installation method | DIN35 standard rail |
| Wiring capacity | 2.5-25mm² |
| Terminal torque | 3.5 N·m |
SPECIAL OFFER
Panel Fan filter or lower for 6inch fan
Chint 3P 800A MCCB Moulded Case Circuit Breaker NXM-800S
- Model : NXM-800S
- Product : MCCB moulded case circuit breaker
- Rated Current: 800A
- Rated Insulation Voltage: 800V; operational voltage up to AC 690V, 50/60Hz
- Breaking Capacity Levels: C (basic), S (standard), H (high), R (current limiting)
- Poles: 3P
- Operation Modes: Direct handle
- Protection Functions: Overload, short-circuit
- Mounting: Vertical and horizontal installation supported
- IP Rating: IP30 (up to IP40 with terminal covers)
- Environmental Limits: −5°C to +40°C operation, ≤2000m altitude
Light Plug 9in1 China Fitting Sheet Board V8 series (Coffee Color)
Schneider LC1D32 Magnetic Contactor 32A 220VAC 3pole
8Switch+2Socket China Fitting Sheet Board V8 series (Coffee Color)
Schneider Easypack 200A 3P MCCB Circuit Breaker EZC250F3200
Schneider Easypack 125A 3P MCCB Circuit Breaker EZC250F3125
